W-VI-IG internally threaded anchor, zinc-plated steel for Allrounder WIT-VM 250, masonry with SH perforated sleeve, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000 injection systems
Female thread anchor W-VI-IG/S steel zinc plated
ANC-(W-VI-IG/S)-(A2K)-M16X170
Art.-no.
5915616170
EAN 4062856001699
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For injection systems Allrounder WIT-VM 250, masonry with perforated sleeve SH, Concrete Multi WIT-UH 300 and Pure Epoxy WIT-PE 1000. Zinc-plated steel
The anchor rod is covered by the following approvals/assessments:
- Injection system ALLROUNDER WIT-VM 250, masonry: ETA-16/0757, ETA-20/0854
- Injection system WIT-Nordic, masonry: ETA-16/0757
- Injection system CONCRETE-MULTI WIT-UH 300, OPTION 1: ETA-17/0127
- Injection system PURE-EPOXY WIT-PE 1000, OPTION 1: ETA-19/0542
Product information
Datasheets(X)
Application area
Can be used for the following injection systems:
- Injection system ALLROUNDER WIT-VM 250, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system WIT-Nordic, masonry (SH) - solid brick and perforated brick, aerated concrete
- Injection system CONCRETE-MULTI WIT-UH 300, cracked and uncracked concrete
- Injection system PURE-EPOXY WIT-PE 1000, cracked and uncracked concrete
W-VI-IG/S (zinc-plated steel) can be used in dry indoor areas
Type description | W-VI-IG/S |
Female thread | 16 mm |
Length | 170 mm |
Suitable for perforated sleeve | 0 - not applicable |
Nominal drill-bit diameter (d 0) | 28 mm |
Effective anchoring depth (h ef) | 170 mm |
Drill hole depth (h 0) | 170 mm |
Min./max. screw-in depth | 16-32 mm |
Required injection mortar | WIT-UH 300, WIT-PE 1000 |
Approval | ETA-17/0127, ETA-19/0542 |
Material | Steel |
Surface | Zinc plated |