Surface sealant Anaerobic
Flange sealant FL 518
SRFSEAL-ECONOMIC-518-RED-50G
Register now and access more than 125,000 products
Red gel
Designed for sealing close fitting joints between rigid metal faces and flanges
Offers gap performance to 0.25 mm (0.01") and contamination tolerance
- Prevents loosening and leakage from shock and vibration
- Cures when confined in the absence of air between close fitting metal surfaces
Oil and other contamination tolerance
Datasheets(X)
- Plane sealing
- Flange seal
- Gearbox and engine casings seal
- Apllication temperature: +5℃ to +45℃
- Both surfaces must be smooth, clean, dry and free of oil, grease, etc
- Apply manually as a continuous bead or by screen printing to one surface of the flanges
- Low pressures (<0.05 MPa, <7 psi) may be used when testing to confirm a complete seal immediately after assembly and before curing
- Flanges should be tightened as soon as possible after assembly to avoid shimming
Weight of content | 50 g |
Chemical basis | Dimethacrylic acid ester |
Colour | Red |
Density/conditions | 1.1 g/cm³ / at 23°C, 50% relative humidity |
Min./max. initial strength | 30-60 min |
Min./max. final strength | 24 h-24 h |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature conditions | -50 to 150 °C |
Min. prevail torque | 2.1 Nm |
Conditions for prevail torque | M10 |
Min./max. compressive shearing strength /conditions | 4.5-8.4 MPa / in accordance with DIN 54452 |
Min./max. shear strength | 3.29-3.29 MPa |
Min. breakaway torque | 1.2 Nm |
Shelf life from production/conditions | 24 Month / at 23°C and 50% relative humidity |