High-temperature silicone

Name: High-temperature silicone
Brand: Würth
SKU: 0892330

Silicone sealant, high temperature
SILSEAL-HITEMP-CARTRIDGE-RED-310ML

Art.-no. 0892330

EAN 4056807347745

All versions

Prices for customers after login

High-temperature silicone

Art.-no. 0892330

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: 4000 8787 58

Specification

Special sealant for joints subject to high temperatures

High temperature resistance up to +250°C, short term (max. 1.5 h) up to +300°C

High resistance to numerous chemicals, suitable for joints with chemical exposure (see resistance list)

Resistant to ageing and UV

Notice

Please observe the "General Notes on Application for Sealants" overview sheet

Sufficient air exchange should be ensured during the curing phase

A higher coating thickness extends the curing time

Classified in accordance with DIN 4102 B2 – normal flammability (in cured state).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For sealing in the construction of furnace units, heating units, air conditioners, washing machines and dryers.

Instructions

The surface must be load-bearing, clean, dry and free from grease, rust and water

Further information in the technical data sheet

Technical information

Contents	310 ml
Container	Cartridge
Chemical basis	Sauer silicones (acetate systems)
Smell/fragrance	Vinegar
Colour	Red brown
Continuous motion absorption	20 %
Min. skin-formation time	8 min
Min. breaking elongation	350 %
Shore A hardness	30
Min./max. temperature resistance	-50 to 250 °C
Min./max. skin-formation time	8-12 min
Conditions for skin-formation time	at 23°C and 50% relative humidity
Full curing speed/conditions	2 mm/d / 23°C and 50% relative humidity
Fungicidal properties	No
Density	1.05 g/cm³
Max. short-term temperature resistance	300 °C
Min./max. processing temperature	5 to 40 °C
Surface pre-treatment required	On porous surfaces
Ultraviolet resistance	Yes
Min. flashing point	250 °C
Coating compatibility	Yes
Resistance against	Aging
Recoatable/Can be painted over	No
Building material class	B2 - Normally inflammable
Shelf life from production	24 Month
Conditions to maintain shelf life from production	at max. 25°C

Documents

Product information

Datasheets (1)

Safety data sheet

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Untaxed price
/PU

Cartridge cutter

CARTKNFE

Art.-no. 071566 09

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle

x 1 pcs

Joint smoother geometric shape with angled edges

JNTSMTHR

Art.-no. 0891181

With angled edges, the joint smoother is especially suitable for sanitation applications

x 5 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).