Engine seal
Engine seal
ENGSEAL-5LTR
Register now and access more than 125,000 products
User-friendly
- No polishing required
- Can also be applied to damp surfaces
Solvent-free
The vehicle can be started directly after application
Contains silicone
Freshens up plastic parts and engine components and leaves behind a water- and dirt-repellent protective film
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Apply a thin layer after washing the engine using the sprayer and allow to dry for approx. 20-30 minutes. No polishing required
Contents | 5 l |
Smell/fragrance | Pleasant |
Colour | Violet |
Chemical basis | Aqueous silicone solution |
pH value / conditions | 7.5 / at 20°C |
Density/conditions | 1 g/cm³ / at 20°C |
Min. flashing point | 100 °C |
Shelf life from production/conditions | 24 Month / at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!